Tin-plated copper-clad aluminum braided mesh tubing is manufactured using appropriately sized copper-clad aluminum alloy wires, which are then subjected to a tin-plating process to ensure a uniform and durable tin coating.
Read MoreSend InquiryNickel-plated copper flat wire is used as a conductor and is braided into a belt shape by a braiding machine. During the braiding process, the braiding density and uniformity need to be adjusted according to the needs to ensure the strength and conductivity of the braided belt. After the braiding is completed, the braided belt is shaped and flattened to make its shape meet the customer's requirements.
Read MoreSend InquiryCopper foil wire braided mesh tube is mainly woven from pure copper foil wire. High-purity copper materials are selected, and copper foil wire is made through smelting, drawing and other processes, and the surface is cleaned and treated. According to customer needs, the copper foil wire braided mesh tube is tinned, nickel-plated, silver-plated and other surface treatments are performed to improve its corrosion resistance, wear resistance and conductivity; the commonly used copper foil wire materials are bare copper foil wire, tin-plated copper foil wire, and silver-plated copper foil wire. The copper content is usually above 99.9%, and it has good conductivity and ductility.
Read MoreSend Inquiry3D heat dissipation braided copper tape is made of multiple strands of extremely fine copper wires woven together to form a three-dimensional mesh structure. This woven structure gives the copper tape a larger surface area, which can fully contact the air and accelerate heat dissipation.
Read MoreSend InquiryThe production process of pure copper silver-plated braided mesh tube: select silver-plated copper wire that meets the requirements as the braiding material. Before braiding, the silver-plated copper wire needs to be inspected to measure whether the wire diameter meets the national standard tolerance; whether the appearance is oxidized and blackened, and ensure that the surface of the material is clean, free of impurities and oil.
Read MoreSend InquiryThe traditional square copper braided wire is braided into a copper braided belt through single or multiple strands, and then extruded into a square braided belt through the outlet of the braiding machine. It is easy to cause damage during the extrusion process. Therefore, when weaving, you must wear gloves to carefully protect the wiring. The density should not be too dense, otherwise the machine will not be able to weave and it is easy to cut the copper wire.
Read MoreSend Inquiry