Copper Lightning Grounding Cable

The Copper Lightning Grounding Cable connects the grounding electrode and the equipment or lightning protection device that needs to be grounded. If it is laid openly, it should be horizontal and vertical, and the spacing between the support clips should meet the specifications, generally 1-1.5 meters in the straight section. If it is concealed, it should be laid in a suitable location such as inside the wall or on the ground, and be careful to avoid damaging the grounding wire.

- The connection between the grounding wire and the grounding electrode, and the grounding wire and the equipment must be welded or a special grounding clamp. The welding point must be firm and without false welding. After welding, anti-corrosion treatment must be done, such as brushing anti-rust paint.

Connection point inspection

- Focus on checking the connection points between the grounding wire and the grounding electrode, electrical equipment, etc. Ensure that the connection is firm and there is no looseness or false connection, because loose connection points will increase contact resistance and affect the discharge of lightning current.

- Check the corrosion of the connection points, because corrosion can also cause poor connection. For connection points with signs of corrosion, they need to be cleaned in time and anti-corrosion measures should be taken.

Quande Electronics has advanced production equipment and technology, which can improve production efficiency and product quality; it has the ability to mass produce, effectively reducing unit costs; and a strict quality control system, from raw material procurement to finished product delivery, with strict checks at every level.