2.0MM Solder Wick Braid Wire

The 2.0MM Solder Wick Braid Wire is a mesh-like structure formed by weaving thin copper wires into a mesh according to a certain weaving method. This structure has good flexibility and deformability and can adapt to electronic components of different shapes and sizes.

The tin-absorbing copper braid uses the capillary action and adsorption capacity of the copper braid to absorb solder. When the tin-absorbing copper braid contacts the molten solder, the solder will penetrate along the mesh structure of the copper braid. Due to the good thermal conductivity of copper, the solder can quickly cool and solidify, and thus be adsorbed on the copper braid to achieve the purpose of removing excess solder.

The tin-absorbing copper braid has the following advantages:

- Good tin-absorbing effect: It can quickly and effectively remove excess solder on electronic components, making the solder joints neater and smoother, and improving the welding quality of electronic equipment.

- Reusable: During use, if the tin-absorbing copper braid is not seriously damaged or contaminated, it can be reused after cleaning, reducing the cost of use.

- Strong applicability: Suitable for welding and repair of various electronic devices, such as computer motherboards, mobile phone circuit boards, electronic instruments, etc., and can remove solder from electronic components of different types and sizes.

How to use the tin-absorbing copper braid: First, place the electronic components that need to remove solder in a suitable position, then cover the tin-absorbing copper braid on the solder joint, and apply an appropriate amount of rosin alcohol flux on the tin-absorbing copper braid to enhance the tin-absorbing effect. Next, heat the solder joint with a soldering iron to melt the solder, and the solder will be absorbed by the tin-absorbing copper braid. Finally, remove the soldering iron and the tin-absorbing copper braid, check whether the solder joint is clean, and if there is any residual solder, repeat the above steps.

Precautions for tin-absorbing copper braid:

- Before use, it is necessary to ensure that the surface of the tin-absorbing copper braid is clean, free of oil and impurities, otherwise it will affect the tin-absorbing effect.

- During the heating process, the temperature and heating time of the soldering iron should be controlled to avoid excessive temperature from damaging the electronic components or the tin-absorbing copper braid.

- After use, clean the solder residue on the tin-absorbing copper braid in time for the next use.

Quande Electronics has been focusing on the copper braiding field for many years. We have accumulated rich industry experience and can quickly understand the essence of the problem and give practical suggestions.